Driveline Overhaul

A full service of everything that carries power from the engine to the axles — transmission, transfer case, clutch, and driveshafts. This rebuild corrects leaks, vibration, and shifting issues while resetting wear items for a smooth, tight driveline that operates like new.

What’s Included

Transmission

• Cleaned, inspected, and resealed (rebuild if condition requires)
• New transmission mounts installed
• Shift linkage cleaned, adjusted, and lubricated
• Pilot bearing replaced
• Rear main seal replaced while transmission is out

Transfer Case

• Complete teardown and inspection
• New bearings, seals, and gaskets throughout
• Proper endplay and preload set to Toyota specification
• Case housing cleaned and resealed
• Levers and linkages rebuilt or serviced

Clutch System

• New clutch disc, pressure plate, and throwout bearing
• Flywheel resurfaced and balanced
• Slave and master cylinders replaced or rebuilt
• Hydraulic line inspected and replaced if worn
• Pedal linkage inspected and adjusted

Driveshafts

• U-joints replaced or rebuilt
• Slip yokes serviced and lubricated
• Shafts balanced
• Hardware replaced or torqued to spec

Optional Upgrades

• Transmission Swap: Upgrade to later-model Toyota 4- or 5-speed units with matched transfer case where applicable
• Transfer Case Gearing: Install lower-range gear sets for off-road drivability
• Lunch Box locker

Testing & Final Checks

After assembly, the entire driveline is filled with the correct fluids, torqued, and test-driven. We verify shift quality, engagement smoothness, and check for leaks or vibration under load. Each job is documented with torque and fluid logs.

Result:
Tight, quiet, and reliable power delivery. No leaks, no chatter, no guessing if it’s in gear — just clean shifts and smooth engagement that feel right.